JVC KD-DV4202 Bedienungsanleitung Seite 26

Menu Item
DIGITAL AUDIO
OUTPUT
DOWN MIX
D. RANGE
COMPRESSION
Output signals through the DIGITAL OUT terminal
Output signals are different depending on the "DIGITAL AUDIO OUTPUT" setting on the
setup menu (see above).
DIGITAL AUDIO OUTPUT
DVD 48 kHz, 16/20/24 bits Linear PCM
96 kHz, Linear PCM
with DTS
with Dolby Digital
with MPEG Audio
Audio CD, Video CD
Audio CD with DTS
MP3/WMA
Select the signal format to be emitted through the DIGITAL OUT (Optical)
terminal.
• PCM ONLY:
• DOLBY DIGITAL/PCM: Select for an amplifier or a decoder compatible with
• STREAM/PCM:
When playing back a multi-channel disc, this setting affects the signals
reproduced through the LINE OUT jacks (and through the DIGITAL OUT terminal
when "PCM ONLY" is selected for "DIGITAL AUDIO OUTPUT").
• DOLBY SURROUND:
• STEREO:
You can enjoy a powerful sound at low or middle volume levels while playing a
Dolby Digital software.
• AUTO:
• ON:
STREAM/PCM
DTS bitstream
Dolby Digital bitstream
MPEG bitstream
44.1 kHz, 16 bits stereo Linear PCM/48 kHz, 16 bits stereo Linear PCM
DTS bitstream
32/44.1/48 kHz, 16 bits Linear PCM
26
Setting
Select for an amplifier or a decoder incompatible with
Dolby Digital, DTS, MPEG Audio, or connecting to a
recording device.
Dolby Digital.
Select for an amplifier or a decoder compatible with
Dolby Digital, DTS, and MPEG Audio.
Select to enjoy multi-channel surround audio by
connecting an amplifier compatible with Dolby
Surround.
Normally select this.
Select to apply the effect to multi-channel encoded
software (excluding 1-channel and 2-channel
software).
Select to always use this function.
Output Signals
DOLBY DIGITAL/PCM
48 kHz, 16 bits stereo Linear PCM
48 kHz, 16 bits stereo Linear PCM
48 kHz, 16 bits Linear PCM
44.1 kHz, 16 bits stereo Linear PCM
PCM ONLY
48 kHz, 16 bits stereo
Linear PCM