Scope Of Delivery; Technical Data; Dimensions And Weights; Operating Conditions - BWT AQA drink AC100 Einbau- Und Bedienungsanleitung

1 Scope of delivery

The complete filter system consists of the following components:
Filter cartridge (1) with hygienic cap and male thread for screwing into the filter head (2).
Filter head (2) with female thread for mounting the filter cartridge (1), suitable for all filter
cartridge sizes with installation label. An Aquastop and two non return valves (inlet and outlet)
1
are installed in the filter head.
Bracket (3) for mounting the filter cartridge.
The filter cartridge needs to be ordered separately. The scope of delivery of the filter head
includes the wall bracket.

2 Technical data

2.1

Dimensions and weights

Total height without bracket, max.
Total height with bracket, max.
Connection height
2
Distance from floor
Installation length
Filter cartridge Ø
Weight of dry filter cartride, approx.
Weight of wet filter cartridge, approx.

2.2 Operating conditions

Connection thread (intake/outlet)
Nominal flow
Line pressure, min.-max.
Flow pressure
Pressure loss at 30 L/h (8 US gallons/h)¹
Pressure loss at 60 L/h (16 US gallons/h)¹
Pressure loss at 180 L/h (48 US gallons/h)¹
Water temperature, min.–max.
Ambient temperature, min.–max.
Ambient temperature during transportation/storage, min.–max.
Bed volume
Operating position
Volume of flushing water
Particle filtration
¹ With a 1.5 m (59.06 inch) hose DN8 fitted to both the intake and outlet.

2.3 Typical capacities and chlorine reduction

Typical capacity²
Chlorine reduction according to 5.5.2EN 14898:2006
² The actual capacities in operation can be higher or lower than the capacities stated in the table. The capacities depend on the quality of the input water,
the flow rate, the intake water pressure and the flow continuity.
A mm (inch)
B mm (inch)
C mm (inch)
D mm (inch)
E mm (inch)
F mm (inch)
kg (lb)
kg (lb)
L/h (US gal/h)
L (US gal)
Category
AC100
280 (11 11/16)
305 (12 1/16)
226 (8 7/8)
65 (2 9/16)
125 (4 15/16)
88 (3 7/16)
0.5 (1.01)
1.1 (2.43)
AC100
3/8" (BSP male)
180 (48)
bar (psi) 2 – 8 (29 - 116)
bar (psi) > 1.2 (> 17.4)
bar (psi) 0.10 (1.5)
bar (psi) 0.15 (2.2)
bar (psi) 0.60 (8.7)
°C (°F) +4 to +30 (+39 to +86)
°C (°F) +4 to +40 (+39 to +104)
°C (°F) -20 to +40 (-4 to +104)
L (US gal) 0.45 (0.1)
horizontal or vertical
L (US gal) 1 (0.3)
µm
AC100
3000 (793)
1
EN
5
9