Kenwood DPX306BT Bedienungsanleitung Seite 17

BLUETOOTH®
BLUETOOTH — Mobile phone
Receive a call
When there is an incoming call:
– All the buttons flash.
– The unit answers the call automatically if [AUTO ANSWER] is set to a selected time. ( 14)
During a call:
– The buttons and display illuminate according to the settings made for [DISPLAY]. ( 19)
– If you turn off the unit, the Bluetooth connection is disconnected.
To
Answer a call
Reject a call
End a call
Adjust the phone volume
[00] to [35] (Default: [15]*)
Switch between hands-free
and private talk modes
* Not applicable for iPhone. During a call, the unit synchronizes the phone volume on the iPhone to the unit.
On the faceplate
Press or one of the number buttons (1 to 6).
Press .
Press or
Turn the volume knob during a call.
• This adjustment will not affect the volume of the other
sources.
Press 6 during a call.
• Operations may vary according to the connected Bluetooth
device.
.
Improve the voice quality
While talking on the phone...
1 Press FNC to enter [FUNCTION].
2 Turn the volume knob to make a selection
(see the following table), then press the knob.
3 Repeat step 2 until the desired item is
selected or activated.
4 Press and hold to exit.
To return to the previous setting item, press
MIC GAIN –10 — +10 (–4): The sensitivity of
the microphone increases as the number
increased.
NR LEVEL –5 — +5 (0): Adjust the noise reduction
level until the least noise is being heard
during a phone conversation.
ECHO CANCEL –5 — +5 (0): Adjust the echo cancellation
delay time until the least echo is being heard
during a phone conversation.
.
Default: XX
13
ENGLISH