Connection - Kenwood KMM-303BT Bedienungsanleitung

Wiring connection
When connecting to an external amplifier, connect its
ground wire to the car's chassis to avoid damaging the
unit.
Connecting the ISO connectors on some VW/Audi or
Opel (Vauxhall) automobiles
You may need to modify the wiring of the supplied
wiring harness as illustrated below.
A7 (Red)
Vehicle
A4 (Yellow)
Default wiring
Pin Color and function
A4 Yellow : Battery
A5 Blue/White : Power control
A7 Red : Ignition (ACC)
A8 Black : Earth (ground) connection
Purple ]
B1
: Rear speaker (right)
Purple/black [
B2
B3 Gray ]
: Front speaker (right)
Gray/black [
B4
White ]
B5
: Front speaker (left)
White/black [
B6
B7 Green ]
: Rear speaker (left)
B8 Green/black [
Fuse (10 A)
Microphone input jack
( 8)
Yellow (Battery wire)
Ignition wire
(Red)
Red (Ignition wire)
Unit
Battery wire
(Yellow)
Red (A7)
Yellow (A4)
ISO connectors
Rear/subwoofer output
If no connections are made, do not let the wire come out
from the tab.
STEERING WHEEL
Light blue/yellow
REMOTE INPUT To the steering wheel
(Steering remote
remote control adapter
REMOTE CONT
control wire)
To the power control
terminal when using the
ANT CONT
Blue/White
optional power amplifier
(Power control
P. CONT
or to the antenna control
wire/ Antenna
terminal in the vehicle
control wire)
To connect the Kenwood
Brown
navigation system, refer
(Mute control wire)
MUTE
your navigations manual.
Part list for
installation
(A) Faceplate
Antenna terminal
(B) Trim plate
(C) Mounting sleeve
(D) Wiring harness
(E) Extraction key
ENGLISH
21