Midea MDRB470MG Serie Bedienungsanleitung Seite 10

2. Remove the upper left hinge cover decorative cover, upper right hinge cover and upper right hinge, and
disconnect the right signal line (signal line terminal 1, 2) at the top of the box body.
3. Remove the refrigerated door body (be careful not to lose small parts such as the shaft sleeve and stop on the
door);
Remove the middle hinge and remove the decorative cover of hinge hole on the other side.
4. Remove the freezing door body (be careful not to lose small parts such as the shaft sleeve and stop on the
door);
Remove the hinge and adjust the angle. Remove and install the lower hinge shaft to the other side of the hinge, and
install the modified lower hinge to the other side of the box.
decorative
cover
decorative cover
EN-8
upper hinge cover
EN
upper hinge
middle hinge