JVC EXAD KD-AVX22E Bedienungsanleitung Seite 65

Symptoms
• The iPod does not turn on or does not work.
• The sound is distorted.
• "Disconnect" appears on the monitor.
• Playback stops.
• "No Files" appears on the monitor.
• "Reset 01" – "Reset 07" appears on the
monitor.
• "Reset 08" appears on the monitor.
• The iPod's controls do not work after
disconnecting from this unit.
• "Restricted Device" appears on the monitor.
• No operations are available while playing
back a track containing artwork.
• "No Disc" appears on the monitor.
• "No Magazine" appears on the monitor.
• "Cannot play this disc Check the disc" appears
on the monitor.
• "Reset 08" appears on the monitor.
• "Reset 01" – "Reset 07" appears on the
monitor.
• The CD changer does not work at all.
• "No DAB Signal" appears on the monitor.
• "Reset 08" appears on the monitor.
• The DAB tuner does not work at all.
• "Antenna Power NG" appears on the monitor. Check the cords and connections.
• No picture appears on the monitor.
• The playback picture is not clear and legible.
Remedies/Causes
• Check the connecting cable and its connection.
• Charge the battery.
Deactivate the equalizer either on this unit or the iPod.
Check the connecting cable and its connection.
The headphones are disconnected during playback. Restart
playback.
No tracks are stored. Import tracks to the iPod.
Disconnect the adapter from both this unit and iPod. Then,
connect them again.
Check the connection between the adapter and this unit.
Reset the iPod.
Check whether the connected iPod is compatible with this
unit. (☞ page 59)
Operate the unit after the artwork is loaded. (☞ page 59)
Insert a disc into the magazine.
Insert the magazine.
Disc does not include playable files. Replace the disc with
playable files.
Connect this unit and the CD changer correctly and press
the reset button of the CD changer.
Press the reset button of the CD changer.
Reset the unit. (☞ page 3)
Move to an area with stronger signals.
Connect this unit and the DAB tuner correctly, then reset
the unit. (☞ page 3)
Connect this unit and the DAB tuner correctly, then reset
the unit. (☞ page 3)
• Turn on the video component if it is not on.
• This unit is not connected to the video component
correctly. Connect it correctly.
Adjust items in <Picture Adjust>. (☞ page 49)
65
REFERENCES