Setting Up Arium; Bagtank 50 And 100 - Sartorius Arium Bagtank 20 Installationsanleitung

Installation
10 Installation Instructions Arium
2.3

Setting Up Arium

Arium Bagtank 50 and Bagtank 100 are only designed for floor installa-
®
tions. Integration into laboratory furniture may be possible if it has sufficient
weight-bearing capacity.
NOTICE
The Arium Bagtank 50 and 100 without in-built pump are not compatible
®
with Arium Pro and Comfort systems. If you wish to do so, you will need a
®
distribution pump for this.
NOTICE
The setup location must also have access to a 100–240 V electrical outlet
(Arium Bagtank 50 and 100 with built-in pump) and an atmospherically
®
vented drain.
Rollers (optional for Bagtank 50 and Bagtank 100)
Optional rollers are available for Arium
NOTICE
The rollers should be mounted before the initial startup of the Arium
Bagtank.
Mounting the rollers to the bottom:
This figure shows the
Arium Bagtank 50
®
with mounted rollers
CAUTION
Arium Bagtanks are heavy!
®
Two people should be used to lift and carry the Bagtank.
Bagtank
®

Bagtank 50 and 100

®
Bagtank floor installations.
®
Rollers
This figure shows the Arium
Bagtank 100 with mounted
rollers
®
®