Setting The Temperature; Using Advanced Functions - Waeco CoolFreeze Cargo 500 Bedienungsanleitung

_kuehlcontainer.book Seite 42 Freitag, 28. Juli 2006 4:12 16
All manuals and user guides at all-guides.com
Operation
Note
The temperature displayed is that of the middle of the interior. The
temperatures elsewhere can deviate from this temperature.
✓ The cooling container starts cooling or heating the interior (only
Cargo 500, Cargo 500P, T22, T32, T56, T82, T162F and T162N).
7.6

Setting the temperature

➤ Press the "SET" button (fig. 0 6, page 7) and hold it down for two sec-
onds.
✓ The display (fig. 0 2, page 7) shows the set cooling temperature in C°.
➤ Use the buttons "▲" (fig. 0 4, page 7) or "▼" (fig. 0 5, page 7) to set the
cooling temperature.
✓ The display (fig. 0 2, page 7) shows the desired cooling temperature in
C°.
➤ Press the "SET" button (fig. 0 6, page 7), to store the desired cooling
temperature.
7.7

Using advanced functions

The device conforms to HACCP and can monitor the temperature of the
goods.
This is how to access the program menu:
➤ Press the "PRG/mute" (fig. 0 3, page 7) and "SET" (fig. 0 6, page 7)
buttons simultaneously for five seconds.
✓ The display (fig. 0 2, page 7) shows "00".
You now need to enter a password.
➤ Set the password to "22" with the "▲" (fig. 0 4, page 7) or "▼" (fig. 0 5,
page 7) buttons.
➤ Press the "SET" (fig. 0 6, page 7), button to confirm the password.
✓ You have now accessed the program menu.
➤ Set the desired parameters.
42
COOLFREEZE