Adjustment Of The Tracking Force - Clearaudio concept mc Bedienungsanleitung

User manual / Bedienungsanleitung

3. Adjustment of the tracking force

Carefully remove the stylus guard from the cartridge by grasping it with
your thumb and forefinger and gently pulling it forward.
The correct tracking force of your cartridge can be found in the technical
data in this user manual.
Please only use these values, since if the tracking force is too light (1g
or less) the cartridge could jump out of the record groove and damage
the needle.
However, you should never set a tracking force of more than 5g as this
could cause damage to the diamond and thus to the cartridge.
In the event that it is not possible to set the optimal tracking force due
the cartridge being too light, you should use a spacer plate available from
your Clearaudio importer/dealer.
Further valuable information for the correct adjustment of your cartridge
can be found in the respective user manual of the turntable and/or
tonearm manufacturer.
Made in Germany Page / Seite 7