Hitachi RAR-7PE1 Anleitung Für Fernbedienung Seite 8

POWERFUL OPERATION
• By pressing (POWERFUL) button during HEATING, DEHUMIDIFYING, COOLING, FAN, AUTOMATIC
operation, the air conditioner performs at maximum power.
• During POWERFUL operation, cooler or warmer air will be blown out from indoor unit for COOLING or
HEATING operation respectively.
CANCEL
NOTE
• When ECO mode, or LEAVE HOME mode is selected, POWERFUL operation is cancelled.
• During POWERFUL operation, capacity of the air conditioner will not increase
– if the air conditioner is already running at maximum capacity.
– just before defrost operation (when the air conditioner is running in HEATING operation).
• After auto restart, POWERFUL operation is cancelled and previous operation shall start.
For multi model connections, POWERFUL operation may not function depending on operation conditions.
●
LEAVE HOME(LH) OPERATION
Prevent the room temperature from falling too much when no one is at home .The initial setting
temperature is 10℃ and the temperature range can be set between 10℃ and 16℃.
NOTE
• During Leave Home operation, fan speed and horizontal air defl ector position cannot be changed.
Press the (POWERFUL) button during operation.
• " " is displayed on the LCD.
START
POWERFUL operation ends in 20 minutes. Then the system
automatically operates with the previous settings used before
POWERFUL operation.
• Press the (ON/OFF) button. or
Press the (POWERFUL) button again.
• " " disappears from the LCD.
Press
1
operation.
Room temperature is set at 10
starts.
START
2
Set the desired room temperature with the TEMPERATURE
buttons.Temperature range can be set between 10
and 16
• "
displayed on the LCD.
Press the
CANCEL
Change to other Operation Mode.
- 8 -
(LEAVE HOME) button during stop or
℃ and heating operation
℃.
", " ", " ", "SET TEMPERATURE" is
(STOP) button.
℃