Samsung 9-Serie Handbuch Seite 8

Using the Mute function
If you press and hold the Touch Pad, it has same effect as pressing the
−
However, if you press and hold the Touch Pad when using Web Browser, the Touch Pad switches to the Scroll mode. When you press the Touch
−
Pad again, the Scroll mode switches general mode.
− Press the Touch Pad or RETURNR
To Enter a channel number through Smart Touch Control
1. While watching a broadcast, press the
2. Using the Touch Pad, highlight a number, and then press the Touch Pad. The TV displays a list of channels that start with the number you
selected.
3. Using the Touch Pad, highlight the channel in the list you want, and then press the Touch Pad.
✎
You can also change the channel by touching the up or down channel icon on the Touch Pad. If you touch the Touch Pad immediately after,
the TV displays the list of memorised channels. Select a channel by moving or flicking your finger up or down, and then pressing the Touch
Pad.
To Display the Tools Menu
Press the button on the right side of the Touch Pad.
T
To Display a History of the Channels You Watched
Press the button on the left side of the Touch Pad.
Š
To control to external devices connected to your TV, setting up the Universal Remote.
If you control an external device by using the Smart Touch Control, the IR Blaster sends an IR signal into a corresponding external device.
Power Switch
Installing batteries (Battery size : AA)
1
1
2
1
Initial Pairing
<Pairing complete>
• IR Blaster
button to return to the general mode.
NUMBERš button on the Smart Touch Control. The TV displays the number button screen.
The IR Blaster Guide
Pairing Button
OPEN
PAIRING
1
ON
2
OFF
1
<Connecting>
English - 8
button on your remote.
MUTEM
1. Hold the both sides of the battery holder
and pull it out.
2. Install four batteries so that the polarity of
the batteries (+/-) matches the illustration
in the battery compartment.
3. Push it back.
30cm ~ 4m
IR receiver
Device Indicator LED
IR Blaster shows the pairing
state.