bürkert 8032 Bedienungsanleitung Seite 9

Transistor output
Relay output
External setpoint
Protection against
short-circuits
Type of cable recommended
electrical connection
NPN version
PNP version
NPN/PNP version
Relay version (with or without
External setpoint board)
Relay + 4-20 mA version
(with External setpoint and
Process Value board)
materials
Housing
Front plate
Fitting S030
O-rings
environment
Ambient temperature
Relative humidity
8032
NPN and/or PNP, open collector, 700 mA max., NPN output: 0,2-30 VDC and PNP output:
supply voltage (see example in the Annex)
Relay version: 250 VAC, 3 A max. or 30 VDC, 3 A max.; programmable
Relay version+External Setpoint :48 VAC, 3 A max. or 30 VDC, 3 A max.; programmable
4...20 mA (option)
yes for the transistor output
shielded, wire section between 0.14 and 0.5 mm
EN175301-803 cable plug (supplied)
EN175301-803 cable plug (supplied)
5-pin M12 cable plug (not supplied)
EN175301-803- (supplied)
EN175301-803- (supplied)
polycarbonate, fiber glass reinforced
polyester
see corresponding instruction manual
FKM standard (EPDM as an option)
0 to +60 °C
< 80%, non condensated
2
1)
1)
and 5-pin M12- (not supplied) cable plugs
1)
and 8-pin M12- (not supplied) cable plugs
1)
1)
EaseOn with connector type 2511 on request