Installing The Ribbon Cassette - Tally T2030/9 Bedienungsanleitung

Installing the ribbon cassette

Installing the
ribbon cassette
STOP
Latch Lever
8
Remove any paper loaded into the printer.
Before opening the cover, make sure that the printer is switched off.
Paper Thickness
Adjustment Lever
Access Cover
Latch Lever
Print head
Set the Paper Thickness Adjustment Lever to the "8" position.
Pull the Latch Levers near the right and left ends on the Access
Cover to the front, and detach the entire Access Cover.
Move the Print head to approximately the center.
The Print Head may be hot. So please be careful not
STOP
to touch the metal part of the Print Head.
Quick start-up