User Safety - Stanley Fatmax FMHT77446 Betriebsanleitung

Contents

• User Safety

• Keypad and LEDs
• Battery Safety
• Batteries and Power
• Using the Accessories
• Turning the Laser On/Off
• Performing Accuracy Check and Calibration
• Operating the Laser
• Using the Remote Control
• Using the Detector
• Maintenance and Care
• Specifications
User Safety
The definitions below describe the level of severity for each signal
word. Please read the manual and pay attention to these symbols.
DANGER: Indicates an imminently hazardous situation
which, if not avoided, will result in death or serious injury.
WARNING: Indicates a potentially hazardous situation
which, if not avoided, could result in death or serious
injury.
CAUTION: Indicates a potentially hazardous situation
which, if not avoided, may result in minor or moderate
injury.
NOTICE: Indicates a practice not related to personal injury which,
if not avoided, may result in property damage.
If you have any questions or comments about this or any
Stanley tool, go to http://www.2helpU.com.
WARNING:
Read and understand all instructions. Failure to follow
the warnings and instructions in this manual may result in
serious personal injury.
SAVE THESE INSTRUCTIONS
WARNING:
Carefully read the Safety Instructions and Product
Manual before using this product. The person responsible
for the instrument must ensure that all users understand
and adhere to these instructions.
CAUTION:
While the laser tool is in operation, be careful not to
expose your eyes to the emitting laser beam. Exposure to
a laser beam for an extended time may be hazardous to
your eyes.
CAUTION:
Glasses are supplied in some of the laser tool kits.
These are NOT certified safety glasses. These glasses
are ONLY used to enhance the visibility of the beam in
brighter environments or at greater distances from laser
source.
SAVE THESE INSTRUCTIONS
WARNING:
The following labels are placed on the laser tools to
inform you of the laser class for your convenience and
safety.
FMHT77446
P ≤1.0mW@630-680nm
FMHT77449
P ≤1.0mW@630-680nm
FMHT77447
P ≤1.0mW@630-680nm
FMHT77448
P ≤1.0mW@630-680nm
P ≤1.0mW@510-530nm
The label on your laser may include the following symbols.
Symbol Meaning
V Volts
mW Milliwatts
Laser Warning
nm Wavelength in nanometers
2 Class 2 Laser
WARNING: LASER RADIATION.
DO NOT STARE INTO BEAM.
Class 2 Laser Product.
WARNING
Laser Radiation Exposure. Do not disassemble or modify
the laser level. There are no user serviceable parts
inside. Serious eye injury could result.
RL600
3V
www.STANLEYTOOLS.eu
RL600L
5V
www.STANLEYTOOLS.eu
RL700L
5V
www.STANLEYTOOLS.eu
RL750L-G
5V
www.STANLEYTOOLS.eu
GB
9