Grandstream GVC3220 Schnellinstallationsanleitung Seite 5

Connecting example:
Connect HDMI cable from
GVC3220 HDMI IN port to laptop's
HDMI port. This is for presentation.
Connect HDMI cable from the
GVC3220 primary HDMI OUT port
to TV's HDMI port.
Note:
For additional information about the GVC3220 installaion, how to connect the de-
vice and link it to the GMD1208 wireless microphone, please refer to GVC3220
local GUI setting, GVC3220 user manual or visit the GVC3220 product web page
from http://www.grandstream.com/support
USING THE GVC3220 REMOTE CONTROL
LED Indicator
Back
Home
Shortcut Keys
Volume Down
OK
Zoom Out
PIP
Send/Answer/Add
Party Into Conference
Backspace
Standard Keypad
* / Record
Wireless connection to
the GMD1208
Connect Ethernet
cable from GVC3220
LAN port to hub/
switch/router (LAN
side).
48V DC power adapter
is connected into outlet.
Power ON/OFF
Trackpad
Menu
IPVT-Personal Room
Volume Up
Navigation Keys: Up/Down,
Left/Right
Zoom In
Presentation
End Call / Remove Party
from Conference
Camera
# / Information
Mute / DND
~ 5 ~
1. Open the battery cover on the back of the remote control. Place four AAA
batteries proprely and put the cover back on, the remote control can be used
normally. At this time, the remote control is in infrared mode, and the LED light
of the remote control shows green color when used.
2. You can also choose to pair the remote control with GVC3220 main case ac-
cording to the interface prompts: Please align the remote control to the device,
long press OK and 5 on the remote control to connect to the GVC, when the
LED on the top of the remote control flashes, the keys can be released. At this
time, the remote control will be automatically paired and connected, and the
LED light of the remote control shows blue color when used.
Notes:
• Users can also download GVC3220 Bluetooth remote control app for An-
droid™ and install to your Android™ device. This app can be used as an alter-
native for the remote control in the GVC3220 package.
• After the remote control is paired, users could follow the setup wizard to initiate
GVC3220 step-by-step, or skip the setup wizard.
CONFIGURING GVC3220 VIA WEB UI
1. Ensure your GVC3220 is properly powered up and connected to the Internet.
2. The IP address of the GVC3220 will show on the top status bar of the con-
nected display device (e.g., TV) via HDMI.
3. Type the IP address in your PC's browser (see figure below).
4. Enter username and password to login. (The default administrator username
is "admin" and the default random password can be found at the back sticker
on the GVC3220).
Note: Please contact your ITSP (Internet Telephony Service Provider) for addi-
tional settings that may be necessary to configure the GVC3220.
For the detailed user manual, please download from:
http://www.grandstream.com/support
~ 6 ~