Product Description And Specifications; Intended Use; Product Features - Bosch 80 SJ Originalbetriebsanleitung

Symbols and their meaning
 Danger area! Keep hands, fingers or
arms away from this area.
Sawing bevel angles:
The middle locking screw has to be loos-
ened to move the adjustable fence.
The two outer fixing screws must not be
loosened!
Observe the dimensions of the saw blade.
The hole diameter must match the tool
spindle without play. Do not use reducers
or adapters.
Do not dispose of power tools into house-
hold waste!
Only for EC countries:
According to the European Guideline
2012/19/EU for Waste Electrical and
Electronic Equipment and its implementa-
tion into national right, power tools that
are no longer usable must be collected
separately and disposed of in an environ-
mentally correct manner.
Product Description and Specifica-
tions
Read all safety warnings and all instruc-
tions. Failure to follow the warnings and in-
structions may result in electric shock, fire
and/or serious injury.

Intended Use

The power tool is intended as a stationary machine for making
straight lengthways and crossways cuts in wood. Horizontal
mitre angles of –47° to +47° as well as vertical bevel angles
of 0° to 45° are possible.
The machine is designed with sufficient capacity for sawing
hard and softwood as well as press and particle board.
When using appropriate saw blades, sawing aluminium pro-
files and plastic is also possible.
Bosch Power Tools

Product Features

The numbering of the components shown refers to the repre-
sentation of the power tool on the graphic pages.
1 Mounting holes
2 Recessed handles
3 Scale for mitre angle
4 Adjustable fence
5 Material clamp
6 Stop for 45° bevel angle
7 Stop screw for 45° bevel angle
8 Bevel lock lever
9 Locking screw for slide device
10 Slide device
11 Sawdust ejector
12 Chip deflector
13 On/Off switch
14 Handle
15 Locking switch for releasing the tool arm
16 Blade guard
17 Retracting blade guard
18 Roller
19 Fence
20 Saw table
21 Insert plate
22 Mitre angle indicator
23 Locking knob for various mitre angles
24 Mitre detent lever
25 Tilt protector
26 Detents for standard mitre angles
27 Spindle lock
28 Transport safety-lock
29 Scale for bevel angle
30 Indicator for bevel angle
31 Stop screw for 0° bevel angle
32 Stop for 0° bevel angle
33 Tilt protector
34 Hex key (5 mm)
35 Hex socket screw (size 5 mm) for mounting of saw blade
36 Clamping flange
37 Interior clamping flange
38 Saw blade
39 Oil damper
40 Fixing screw for oil damper
41 Locking screw of the adjustable fence
42 Mounting holes for material clamp
43 Threaded rod
44 Screws for insert plate
45 Screw for bevel angle indicator
46 Screw for mitre angle indicator
Accessories shown or described are not part of the standard deliv-
ery scope of the product. A complete overview of accessories can
be found in our accessories program.
English | 21
1 609 92A 0HN | (16.6.14)