Care and maintenance
Switching the appliance off
Disconnect your appliance from the electricity
supply before carrying out any work on it.
Cleaning the appliance
! Do not use abrasive or corrosive detergents such
as stain removers, anti-rust products, powder
detergents or sponges with abrasive surfaces: these
may scratch the surface beyond repair.
! Never use steam cleaners or pressure cleaners on
the appliance.
• It is usually sufficient simply to wash the hob
using a damp sponge and dry it with absorbent
kitchen towel.
• The removable parts of the burner should be
washed regularly with warm water and soap,
ensuring any stubborn residue is removed.
• For hobs which light automatically, the terminal
part of the electronic instant lighting devices
should be cleaned frequently and the gas outlet
holes should be checked for blockages.
• Stainless steel can be marked by hard water that
has been left on the surface for a long time, or by
aggressive detergents containing phosphorus.
After cleaning, rinse well and dry thoroughly. Any
remaining drops of water should also be dried.
Gas tap maintenance
Over time, the taps may become jammed or difficult
to turn. If this occurs, the tap must be replaced.
! This procedure must be performed by a
This procedure must be performed by a
This procedure must be performed by a
This procedure must be performed by a
This procedure must be performed by a
qualified technician who has been authorised by
qualified technician who has been authorised by
qualified technician who has been authorised by
qualified technician who has been authorised by
qualified technician who has been authorised by
the manufacturer.
the manufacturer.
the manufacturer.
the manufacturer.
the manufacturer.
GB
GB
GB
GB
GB
23