Menu Operation; Picture Menu; Tuning Procedure - Nordmende CRT 14 Gebrauchsanweisung

GB
3.

MENU OPERATION

Press [MENU] button continuously, to scroll through the MENU selection, as follows:
PICTURE
( 14" / 15" models )
MENU display disappears about 2 min. after last selection.

3-1 PICTURE MENU

Function: Brightness, Contrast, Colour, Sharpness setting
A. Press [MENU] button repeatedly to select "Picture"
B. Select each function using the [P+]/[P-] button.
C. Each value can be controlled by the [V+]/[V-] button.
D. Repeat any functions if required.
TINT option is available only in NTSC system

3-2 TUNING PROCEDURE

Auto Tune
Function: Automatic Search and Memory (ASM) is available for program installation from antenna input.
Using [MENU] button on the front or on the Remote for ASM.
A.
Press [MENU] button repeatedly to select "Tuning"
B.
Press [P+] or [P-] button, to select "AUTO TUNE".
C.
Press [V+] button, to visualize a new menu
D.
Press [P+] or [P-] button to select " Worldwide", " France" or "Both"
E.
Press [V+] button, to start "ASM" and memorize into program list.
F.
Wait until function has finished.
Note:
- Select "Worldwide" if in an area in which the L L' system is not available
- Select "France" if in an area in which the L L' system is available.
- Select "Both" if in an area in which information about the availability of the L L' system is not available
Manual Tune
Function: Manual Tune for Antenna input.
Each channel can be given a number (0÷255), before starting manual tuning.
A. Select the program number which to make the search
B. Press [MENU] button repeatedly to select "TUNING".
C. Press [P+] or [P-] button, to select "MANUAL TUNE".
D. Press [V+] button, to visualize a new menu
E. Press [P+] or [P-] button to select " Worldwide" or " France"
F. Press [V+] or [V-] button to start search.
G. Wait until function has finished.
H. If it is not the desired channel, press [V+] or [V-] again for a new search.
Fine Tune
Function: fine Tuning for current setting.
A. Select the channel to be fine tuned.
B. Press [MENU] repeatedly to select "TUNING".
C. Press [P+] or [P-] to select "FINE TUNING"
D. Press [V+] or [V-] for fine tuning.
E. Press [MENU] to end.
Organizer
Function: exchange of the channels
A. Press [MENU] button repeatedly to select "TUNING" .
B. Using [P+] or [P-] button, select "ORGANIZER"
C. Press [V+] to enter in the new menu
D. Using [P+] or [P-] button, select "Channel 1".
E. Press numeric buttons or [V+] / [V-] button to select the channel to be change
F. Press [P-] button to select "Channel 2"
G. Press numeric buttons or [V+] / [V-] button to select the second channel
H. Using [P+] or [P-] button select "Exchange".
I. Confirm operation pressing [V+] button.
J. Repeatedly pressing [MENU] button to exit.
TUNING TIMER SETUP LANGUAGE
8