Hama Add-On Bedienungsanleitung Seite 6

4.2 Fitting the adapter
• Thanks to the union nut, the thermostat can be fitted to all valves with the thread dimensions M30 x 1.5 mm
from the most common brands such as Heimeier, MNG, Junkers, Landis+Gyr (Duodyr), Honeywell-Braukmann,
Oventrop, Schlösser, Comap, Valf Sanayii, Mertik Maxitrol, Watts, Wingenroth (Wiroflex), R.B.M, Tiemme,
Jaga, Siemens and Idmar.
• With the adapters included in the extent of delivery, the device can also be fitted to radiator valves of type
Danfoss RA, Danfoss RAV, Caleffi and Giacomini.
To fit the attachments, please follow the instructions below for the respective part.
Danfoss RA and Danfoss RAV
• While fitting, ensure that the pins inside the adapter cover the same position as the notches on the valve.
• Fully attach the adapter appropriate for your valve.
• During fitting, you may need to use a screwdriver and bend the adapter slightly in the area of the screw
bushing. This will enable the adapter to be pushed more easily onto the valve. After locking it onto the body
of the valve, secure the adapter using the enclosed screw and nut.
Danfoss RAV
• On Danfoss RAV valves, the tappet extension must be placed on the valve pin before fitting.
Caleffi
• Please place the Caleffi adapter directly on the valve.