Disposal; Technical Data - Gardol GVL-M-1800-37 Originalbetriebsanleitung

Fault/malfunction
Chattering noise.
Whistling noise.
Insufficient performance.
If you can't fix the fault yourself, contact your nearest
vendor. Please be aware that any improper repairs
will also invalidate the warranty and additional costs
may be incurred.

Disposal

Disposal of the appliance
Appliances which are labelled with the adja-
cent symbol must not be disposed of in
household waste. You must dispose of such
old electrical and electronic equipment sepa-
rately.
– Please check with your local authority about the
possibilities for correct disposal.
Through separate disposal you send old equipment
for recycling or for other forms of re-use. You will thus
help to avoid in some cases that damaging material
gets into the environment.
Disposal of the packaging
The packaging consists of cardboard and
correspondingly marked plastics that can
be recycled.
– Make these materials available for
recycling.

Technical data

Item number
Rated voltage
Rated power
Protection class
Grade of protection
Idling speed
Working width
Working height
Number of steps
Volume of cutting bag
Acoustic power (L )*
WA
Acoustic pressure (L )*
PA
Vibration**
Weight
*) The specified values are emission values and do not necessarily
represent safe workplace values. Although there is a correlation
between emission and immission levels, this cannot be used to
infer whether additional safety measures are necessary or not.
Factors which affect the current immission levels at the work-
place, include the type of room, other sources of noise, e. g. the
number of machines operating and other processes taking place
in the vicinity. Permitted workplace values can differ from coun-
Cause
Foreign body in the working roller? Switch the
Drive belt slipping?
Grass too long?
Drive belts defective?
Is the working roller worn?
27050837
230 V -240 V~,
50 Hz
1800 W
II
IPX4
-1
3500 min
370 mm
−12...+10 mm
5
45 l
100 dB(A)
89 dB(A)
(K = 3 dB(A))
< 4 m/s²
(K = 1,5 m/s²)
13 kg
21
Remedy
machine off, remove the foreign
body.
Contact your local vendor.
Mow the grass before de
Contact your local vendor.
try to country. This information is designed to help the user to
better assess the dangers and risks. Determination of noise
emission values in accordance with EN 60745-1.
**) The specified vibration emission value was measured in accord-
ance with a normed test procedure and can be used in order to
compare one tool with another. The specified vibration emission
value can also be used for an introductory evaluation of the
exposure. The vibration emission value may fluctuate from the
specified value during actual use of the power tool. These fluc-
tuations will depend on the way in which the power tool is used.
Try to keep vibrations to a minimum. One method of reducing
the vibration load is, for example, limiting the length of time you
work with the tool. All parts of the operating cycle must be taken
into account for this purpose (for example, also including times
in which the power tool is switched off and times in which it is
switched on, but is running without load). Determination of vibra-
tion emission values in accordance with EN 60745-1.
GB
-thatching.