Picture Menu Content; Adjusting The Sound Settings - OK. ODL 50850UV-TFB Gebrauchsanweisung

Picture Menu Content

The following options show all the available picture
setting adjustment on your TV.
Picture settings are input-specific and all of these
settings will not apply to all Inputs. Some options may
not be available depending on the input source.
Picture Mode: Set the picture mode to suit your
preference or requirements. Picture mode can be set
to one of these options: Standard, Vivid, Sport, Film
and Game. You can also manually adjust each mode.
Available options may differ depending on the currently
set input source.
Auto Backlight: Set the Auto backlight to Off, Low,
Medium, High.
Brightness: Increases or decreases the picture
brightness from 0 - 100.
Contrast: Adjusts the difference between light and
dark levels in the picture. The range is from 0-100.
Colour: Adjusts the difference between light and dark
levels in the picture. The range is from 0-100.
Sharpness: Adjusts the level of crispness in the edges
between light and dark areas of the picture. Range
is from 0-20.
Colour Temperature: The colour temperature setting
has 4 preset settings: User, Cool, Standard, Warm,
When selected each of these settings has individual
adjustments. Red, Green and Blue gain can all be
adjusted from -20 to 20.
Picture Format: The picture format can be set to
Automatic, Superzoom, 4:3, Film Expand 14:9, Film
Expand 16:9, Wide Screen and Full.
Advanced Picture Settings
Hue: Increases or decreases the picture hue from
-50 (reds) to 50 (greens).
Gamma: Choose from Middle, Bright (standard)
or Dark (film). Highlight your desired setting then
press Select.
Colour Tuner: Colour Tuner can be switched on
and off by selecting Enable option On or Off. Then
you have 5 separate setting that can be individually
adjusted. Hue, Saturation, Brightness, Offset,
Gain.
11 Point White Balance Correction: Sets white
balance of input image between cool or warm. 11
Point White Balance Correction can be switched on
and off by selecting Enable option On or Off. Then
you have 4 separate setting that can be individually
adjusted. Gain, Red, Green, Blue. Gain can be
adjusted from 5% to 100%, highlight your desired
setting then press Select. Red, Green and Blue can
be adjusted from 0 - 100, the default setting is 50.
Dynamic Noise Reduction: Dynamic Noise
Reduction has 5 different setting Off, Low, Medium,
Strong, Auto. The default setting is Medium.
Highlight your desired setting then press Select.
MPEG Noise Reduction: MPEG Noise Reduction
has 4 different setting Off, Low, Medium, Strong.
The default setting is Medium. Highlight your
desired setting then press Select.
Adaptive Luma Control: Makes higher depth
impression by enhancing dark and bright areas.
Adaptive Luma Control has 4 different setting Off,
Low, Medium, Strong. The default setting is Low.
Highlight your desired setting then press Select.
Local Contrast Control: Divides each frame to
small regions and applies independent contrast
curves for every distinct region. Local Contrast
Control has 4 different setting Off, Low, Medium,
High. The default setting is Low. Highlight your
desired setting then press Select.
DI Film Mode: Compensates interlaced inputs for
best image and motion quality. DI Film mode has
2 setting Auto and Off. The default setting is Off.
Highlight your desired setting then press Select.
Blue Stretch: Changes white balance of mid-high
gray levels to cooler colour temperature. Blue
Stretch can be switched On or Off.
Game Mode: Game Mode can be switched On
or Off.
PC Mode: PC Mode can be switched On or Off.
HDMI RGB Range (HDMI input only): Sets correct
interpolation method for HDMI input signals. HDMI
RGB Range has 3 different settings; Auto, Full,
Limit. The default setting is Auto. Highlight your
desired setting then press Select.
HDMI Input Mode (HDMI input only): HDMI Input
Mode has 4 different settings; Mode 1 (1.4), Mode
2 (2.0), Auto, Reset. The default setting is Auto.
Highlight your desired setting then press Select.
Dolby Vision Notification: Dolby Vision notifications
can be switched On or Off. Notifications are switch
on as default.
Reset to Default: Resets all setting to factory default
settings.

Adjusting the Sound Settings

Allows you to adjust the sound settings on your TV. You
can access the sound settings menu via the Settings
menu on the main screen or by pressing and holding
the Home button for 2 seconds while viewing any input.
Accessing Sound Settings via Settings Menu
Press the Home button, scroll to Settings tab and
press the Select button. Scroll to Display & Sound
option and press the Select button. Scroll down to
Sound Settings option and press the Select button.
English - 42 -