Specifications; Maintenance - BGS technic 2813 Bedienungsanleitung

INTENDED USE
This torque wrench set is used to tighten right-hand thread screws to a previously set torque value.

SPECIFICATIONS

Torque Range: 10 - 50 Nm
Fine-Scale: 0.5 Nm
Accuracy: +/- 4 %
Inner Square (9x12 mm) for Open End Spanner Heads & Ratchet Head
CONTENT
Torque Wrench with 9 x 12 mm Inner Square
Ratchet Head, 48 Tooth, reversible, Drive: Outer Square 6.3 mm (1/4")
Open End Spanner Heads in Sizes: 7 - 8 - 9 - 10 - 11 - 12 - 13 - 14 mm
INTRODUCTION
1 Inner square 9x12 mm
2 Release balls (front side & back side)
3 BGS item number
4 Serial number (back side)

MAINTENANCE

• A check of the torque wrench for accuracy must be made at regular intervals, only then a perfect
function is guaranteed.
• Only clean the torque wrench with a dry, soft cloth.
• Never immerse the torque wrench in a liquid.
BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
Torque Wrench Set, 10 - 50 Nm
Tel.: 02196 720480
Fax.: 02196 7204820
mail@bgs-technic.de
5 Viewing window (torque value)
6 Fine scale (0.5 Nm)
7 Torque adjustment ring
8 Handwheel safety locking
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed
BGS 2813