Appliance Description - Concept RK3040 Bedienungsanleitung

• Prior to switching the appliance on, make sure the lid is closed properly. Do not open the lid during heating.
• We do not recommend using the kettle for heating liquids other than water.
• Do not switch the appliance on without water. If the empty kettle is turned on, the safety fuse will deactivate it
automatically. Let the kettle cool, fill it with cold water and you can use it as before.
• Extra care should be taken while opening the lid when refilling a hot kettle with water.
• Take precautions to avoid scalding with hot water while handling the kettle. Always hold the kettle by the handle, as
the vessel can be hot and may burn you.
• Pour the hot water slowly – excessive tilting may cause the water to flow through the lid – RISK OF SCALDING!
• Do not use abrasive or chemically aggressive substances to clean the appliance.
• Do not use the appliance if it does not operate properly, or if it has been dropped, damaged or exposed to a liquids.
Take the appliance to an authorised service centre for testing and repair.
• Never use the appliance with the supply cable or plug damaged; have the fault repaired immediately by the authorised
service centre.
• The appliance is not designed for outdoor use.
• The appliance is intended for household use only and not for commercial use.
• Do not immerse the supply cable, the plug, or the appliance itself in water or any other liquid.
• Never repair the appliance yourself. Instead, contact the authorised service centre for repair.
Failure to follow the manufacturer's instructions may lead to refusal of warranty repair.
1. This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental
capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction
concerning use of the appliances by a person responsible for their safety.
2. Children should be supervised to ensure that they do not play with the appliance.

APPLIANCE DESCRIPTION

1. Lid
2. Kettle body
3. Water mark
4. Button to open the lid
5. Handle
6. Switch
7. Supply cable base
8. Operating light
CAUTION:
Prior to first use, we recommend boiling the maximum volume of water in the kettle at least 3 times, then pouring it
out. The kettle is then ready for operation.
The kettle may only be used with the supplied base.
18
4
1
2
7
EN
3
5
6
8
RK3040