Chrono; Enabling/Disabling The Chrono - Dal Zotto Brunella Elite Benutzerhandbuch

CHRONO

This function allows stove ignition and switch-o to be automatically programmed.
The factory setting for CHRONO is o .
The chrono allows the programming of 4 time slots per day, which can be used every day of the week.
For each time slot, it is possible to set ignition and switch-o times, speci c days of application, desired temperature and set power.
Current day and time settings are essential for the correct operation of the Chrono.
Recommendations
Before using the chrono function, it is necessary to set the current day and time. Therefore, check that the points in the sub-chapter
"DATE TIME" have been followed. To use the chrono function correctly, it must not only be programmed, but also enabled. The 4 time
slots can be overlapped using the ignition and switch-o time settings. In this way, it is possible to create a combination of time slots
with di erent temperatures and power levels, without changing the status of the stove.
N.B.: in the case of overlapping time slots, the stove will remain on until the last switch-o time.

ENABLING/DISABLING THE CHRONO

CONTROLS PROCEDURE
Š Press key 6.
Š Press 3 until CHRONO appears and con rm by pressing key 6.
Š Con rm ENABLING by pressing 6.
Š Use keys 4 -5 to enable (ON) or disable (OFF)
Š Press key 6 to con rm and key 1 to scroll back through the menus until the initial page.
CHRONO >
IF THE WEEKLY CHRONO IS ENABLED ON THE CONTROL BOARD, THE ICON IS VISIBLE ON THE SIDE.
60
ENABLING >
PRG1 > START PRG1
STOP PRG1
MONDAY...SUNDAY
SET PRG1
POWER PRG1
PRG2 > START PRG2
STOP PRG2
MONDAY...SUNDAY
SET PRG2
POWER PRG2
PRG3 > START PRG3
STOP PRG3
MONDAY...SUNDAY
SET PRG3
POWER PRG3
PRG4 > START PRG4
STOP PRG4
MONDAY...SUNDAY
SET PRG4
POWER PRG4
WI-FI
PRG1
PRG2
PRG3
PRG4
LOW-TA - 07- 37 °C - HOT
LOW-TA - 07- 37 °C - HOT
LOW-TA - 07- 37 °C - HOT
LOW-TA - 07- 37 °C - HOT
!
BT STBY
ENGLISH
On/o Enable/disable PRG 1
On/o Enable/disable PRG 2
On/o Enable/disable PRG 3
On/o Enable/disable PRG 4
OFF-00:00 PRG1 ignition time
OFF-00:00 PRG1 switch-o time
On/o Enable/disable days PRG1
Set thermostat PRG1
1-5 Set power PRG1
OFF-00:00 Ignition time PRG2
OFF-00:00 Switch-o time PRG2
On/o Enable/disable days PRG2
Set thermostat PRG2
1-5 Set power PRG2
OFF-00:00 Ignition time PRG3
OFF-00:00 Switch-o time PRG3
On/o Enable/disable days PRG3
Set thermostat PRG3
1-5 Set power PRG3
OFF-00:00 Ignition time PRG4
OFF-00:00 Switch-o time PRG4
On/o Enable/disable days PRG4
Set thermostat PRG4
1-5 Set power PRG4
0