ENGLISH
the pulp exit in the bowl, where the silicone base of the bowl is. 3.2 To make sure, check if the
signals in the bowl and the filter are aligned.
4. Once the filter is properly fixed (you should not be able to turn it), fit the juicing drill in the axis
at the centre of the bowl base of your My Master Frutti.
5. Fit the feeding mouth in the bowl. In order to do so, align the OPEN signal of the mouth piece and
the signal in the bowl.
6. 6.1 Turn the feeding mouth clockwise, aligning its CLOSED signal with the signal in the bowl. 6.2
Make sure that the flap in the mouth piece fits the upper part of the main body of the My Master
Frutti. Now, you can turn your My Master Frutti on to prepare any juice you can imagine.
CECOJUICER PRO
11