sylvac S_Dial Mini Bedienungsanleitung Seite 13

6. Favourite key
The «favourite» key gives direct access to a predefined function, and can be configured according to the needs of the
user. In order to assign a function to the «favourite» key, give a prolonged press on
function :
Data
transmission
(default)
Hold display
Re-initialise
Min-Max-Delta
Zero reset
Validation of selection: By a prolonged press on
Note :
- A function can also be assigned via RS232 using the command <FCT + Function No.> (FCT 0..9 A..F)
example : Toggle unit = <FCT7>, multiplication factor = <FCTA>.
Recall Preset
Nor-Min-Max-
Delta
ON-
Bluetooth
®
OFF
mm – IN
or a short press on
SET
13
, and then select the required
0.01 ↔ 0.001
Measurement direction,
positive - negative
1:1 - N:1 factor
Analog display
or .
MODE
E
No function