User Manual - SBS TEEARSETMONOMOTOBTK Bedienungsanleitung

UK

USER MANUAL

Power on / Pairing
- Press the multi-function key (MLF) on the headset for about 5
seconds and you will hear "Power ON";- the LED light on the
headset will flash Red / Blue alternately; activate Bluetooth on
the phone, then search for and select MOTO BTK.
- It will be necessary to enter the pairing password "0000" only
if the Bluetooth version is earlier than V2.1,
- Once the headset is connected to the smartphone, the LED
light briefly flashes Blue and you will hear "Connected" -
pairing between headset and smartphone was successful!
IMPORTANT:
- If pairing between the headset and smartphone is not
completed within 180 seconds, the headset will automatically
turn off. In this case the red LED light flashes briefly and
Bluetooth switches off automatically. The "Power off" audio
message will be heard.
- After connecting the first time, just perform the headset
activation procedure for subsequent connections with the
same smartphone. By activating Bluetooth on the smartphone,
the headset will be automatically recognized and will connect
to the smartphone.
Call function
Answering a call: Click the MLF key once to answer an incoming
call.
End a call: Click the MLF key once to hang up.
Reject a call: Double-click the MLF key.
Call the last number: Double-click the MLF key. Repeat the
operation to cancel redialing of the number.
Mute ON: During a call, press and hold the "volume +" key for 2
seconds, the audio message "MUTE ON" will be heard.
Mute OFF: When the audio is inactive (Mute ON) during a call,
press and hold the "volume -" key for 2 seconds, the audio
message "MUTE OFF" will be heard.
4