CD20, CD30
•
Disconnect the cooling device or switch it off when you turn off the
engine. Otherwise you may discharge the battery.
•
The cooling device is not suitable for transporting caustic materials or
materials containing solvents.
•
The insulation of the cooling device contains flammable cyclopentane
and requires special disposal procedures. Deliver the cooling device
at the end of its life-cycle to an appropriate recycling center.
•
Do not use electrical devices inside the cooling device unless they are
recommended by the manufacturer for the purpose.
•
Do not place the cooling device near naked flames or other heat
sources (heaters, direct sunlight, gas ovens etc.).
•
Risk of overheating!
Ensure at all times that there is a minimum of 50 mm ventilation on all
four sides of the cooling device. Keep the ventilation area free of any
objects that could restrict the air flow to the cooling components.
Do not place the cooling device in closed compartments or areas with
none or minimal air flow.
•
Ensure that the ventilation openings are not covered.
•
Do not fill the inner container with ice or fluids.
•
Never immerse the cooling device in water.
•
Protect the cooling device and cables against heat and moisture.
•
For HGV operation:
Empty the coolbox and switch the device off (see chapter "Switching
off the coolbox" on page 13), before the driver's cabin is tipped up.
3
Scope of delivery
Quantity
Description
1
Drawer coolbox
4
Mounting bracket
1
Operating instructions
EN
Scope of delivery
9