BEARWARE 303586/20190116DG054 Bedienungsanleitung Seite 23

Low battery:
Outdoor temperature display:
Channel display
The weather station receives the signal of the outdoor sensor
automatically after all settings have been configured. You can switch
between the different channels using the "CHANNEL" button. The
channels of the outdoor sensor can be selected on the device directly
using a toggle switch.
Frost alarm
Using the temperature alarm, the base station will emit an
alarm if the sensor reading is outside this temperature range.
The status of the indoor and outdoor alarms is shown using
these icons.
English
If the battery symbol appears, then the inserted
batteries are discharged and should be replaced with
new batteries as soon as possible. This applies for the
outdoor sensor as well as the base station.
The outdoor temperature is measured by the
outdoor sensor and shown to an accuracy
of one tenth of a degree. The configured
temperature unit is shown to the right of the
measured value. The temperature unit can
be changed between °C and °F. To do this,
press the "MAX/MIN" button on the front
of the weather station. The temperature
on the display of the outdoor sensor can be
toggled using the °C / °F button in the battery
compartment of the sensor.
23