What To Do If - Becker Centronic TimeControl TC4410-II Montage- Und Betriebsanleitung

Problem
Drive is not functioning.
No reaction from transmitter after
changing batteries.
BATTERY appears on the display.
Desired drive is not functioning.
Astro program is not switching ac-
curately.
The transmitter does not carry out
the set switching commands.
The transmitter does not carry out
the set switching commands accur-
ately.
Roller shutter does not travel to limit
position.
56 - en

What to do if...?

Insert new batteries.
Insert batteries correctly.
Reduce distance from receiver.
Program transmitter.
Press the RESET button.
Check the settings.
Insert new batteries.
Select correct channel.
Set correct date.
Set correct city or exact degree of
latitude/longitude.
Switch off holiday function.
Adjust Astro shift.
Set the slide switch to Automatic
mode.
Switch off holiday function.
Set the limit position in the PROG
END POSITION SETTING menu.
Remedy