Maestro MR270 Bedienungsanleitung Seite 7

EN
Operation
Before startup
- Remove all wrap materials and stickers
- Make sure that all the parts of appliance don't have damages.
- Unwind the power cord completely.
- Place the device on a flat dry heatproof surface.
- Connect the device to the mains.
The hair must be clean, dry and brushed.
ATTENTION! A small quantity of smoke or a specific smell may
appear after the first switching ON as the result of conservation
materials contact with heating element. This is a normal
phenomenon and it shall disappear after several minutes of
operation.
- Place the switch (2/Fig. 2) to the position «ON». Light indicator (3/
Fig.1) will go red and the tongs will begin heating.
- The heating up takes about 1 minute.
- When the set temperature is reached the light indicator becomes
green and the device is ready for operation.
- To make a wavy style "gaufre" press a strand and keep it between
the plates for 2-3 seconds.
- Keep the plates together pulling the tongs down along the
whole length of hair from the roots to the ends with one smooth
movement. If the strand is not straightened enough repeat the
movement. Repeat it till the hair is quite straitened.
- The tongs must not contact the skin of the head. Do not contact
ears, neck and skin with the tongs. Keep the tongs by the handle
when using (4/Fig.1).
- Do not brush your hair immediately after straitening, wait till it
cools down.
7