Cycling Computer Operations; Assist Mode - Blaupunkt Frida Bedienungsanleitung

8. CYCLING COMPUTER OPERATIONS

LC- CONTROL DISPLAY
The control unit is integrated with the LC-
Display and operates the drive system. It is
located on the handlebar.
Control Unit Function Overview
1.1 Power Button ON/ OFF
Hold button for 2 seconds to switch
on/off the LED control unit and electric drive
system.
The system will automatically turn off if left
idling for more than 10 minutes.

1.2 Assist mode

Hold or
desired assist level for electric system. The
lowest is Level 1 and the highest is Level 5.
When powered on, the default is Level 1.
When there is no numeric power level
displayed it means the folding e-bike is in
park or it functions as a standard bike with
no assist from the motor. You will feel the
electric assistance kicking in once selecting
again between Levels 1 up to 5.
24
Anleitung-Frida-Franzi-Clara.indd 24
buttons to select the
SAFETY NOTE: When you move the pedals, the
engine can start if you are not yet safely on the
bike. Do not switch on the computer until you
have taken a seat on the folding e-bike or set
the support level to 0. Set the support to 0
before getting off the bike.
1.3 Lights/ Backlit Button ON/ OFF
With the display switched on, hold the
button for 2 seconds to turn on/ off the
headlight, taillight and the display backlight.
There are five levels of backlight brightness
that can be selected by user.
1.4 Walk Assist
The folding e-bike comes equipped with
walk assist function. This feature propels
forward your folding e-bike with a constant
speed of 6km/h without pedaling and
requires nothing but to hold it balanced
when walking along side it. It comes very
handy when needing to push it up a steep
incline.
Hold the button to activate the walk
assist. This function remains activated as
long as you hold the button and
deactivates the moment you stop holding it.
SAFETY NOTE: Push Assist function should only
be used when the wheels are in contact with
the ground. Danger of injury may occur if push
assist function is activated since the wheel will
start spinning.
24.06.2020 09:11:58