Safety advice / Before use / Bringing into use
Do not use the product for
drinks!
Fill the device only with liquids at
temperatures of 0 - 40 °C.
Before use
Q
m cAUtIOn! Check that the device is
functioning properly! Check the pressure
sprayer before each use to ensure that it
is free of visible damage and is func-
tioning safely. To do this, carry out the
following tests and inspections:
check the pressure sprayer for
visible signs of damage
j
C heck the container
of damage.
j
C heck the suction hose
signs of damage.
j
C heck the carrying strap
signs of damage.
check connections
j
C heck that the hose connections are fitted
tightly.
j
C heck that the pipe connections are fitted
tightly.
check that the pressure sprayer is
tight and leak-free
j
P ump the empty pressure sprayer to
approx. 2 bar.
The pressure must not fall more than ap-
prox. 0.5 bar in a space of 30 minutes.
32 GB/MT
56222_flo_Drucksprüher_Content_LB5.indd 32
check operation of the safety
valve
j
j
Q
Q
j
j
for visible signs
5
for visible
18
for visible
6
Q
j
j
j
j
P ump the pressure sprayer to approx.
2 bar.
P ull the safety valve
3
You must be able to hear the pressure
escaping.
Bringing into use
Attaching the spray tube
without the extension
tube (Fig. B)
T urn the union nut
anticlockwise to
16
release it from the handle
spray tube
into the handle
12
far as it will go.
T ighten the union nut
16
clockwise.
note: You can also extend the spray
tube
by turning the lock nut
12
clockwise to release it and then pulling
out the extension. Then retighten the
lock nut
(see Fig. B).
10
Attaching the spray tube
with the extension tube
(Fig. c)
L oosen the union nut
15
ing it anticlockwise. Insert the spray
tube
into the union nut
12
T ighten the union nut
15
clockwise.
I nsert the extension tube
union nut
.
16
T ighten the union nut
16
clockwise.
up to the stop.
. Push the
17
as
17
by turning it
anti-
10
slightly by turn-
.
15
by turning it
into the
9
by turning it
®
02.12.10 16:21