Wind Speed Sensor; Moon Phase - Velleman PEREL WC224 Bedienungsanleitung

WC224
Light
Press SET again to select the light unit (lux, fc, w/m², default: w/m²).
Temperature
Press SET again to select the outdoor temperature unit (°C or °F, default: °C).
In normal mode, press TEMP. to view wind chill, heat index and dew point temperature.
Hold TEMP. pressed to register a new transmitter.
Note that an out-of-range temperature will be displayed as --.-.
Wind Speed
Press SET again to select the wind speed unit (km/h, mph, knots, m/s, bft, default:
km/h).
In normal mode, press WIND + to view the wind/gust and wind direction.
Rain
Press SET again to select the rainfall unit (in/mm, default: mm).
In normal mode, press RAIN to view the rain rate, event, rain day, rain week, rain
month and rain total.
Hold RAIN pressed to reset the current displayed rain value.

Moon Phase

Press SET again to select the Northern or Southern hemisphere.
V. 02 – 04/06/2020 9 ©Velleman nv