Before Starting The Installation Procedure; Intended Use; Installation Site; Unit Description - Daikin FWP04 Installations Und Bedienungs

1

BEFORE STARTING THE INSTALLATION PROCEDURE

Carefully read this manual.
Installation and maintenance should be carried out by technical
personnel qualified for this type of machine, in compliance with
current safety regulations.
When receiving the unit please check its state verifying if any
WARNING:
Electrical and electronic products may not be
mixed with unsorted household waste. Do NOT try to dis-
mantle the system yourself: the dismantling of the system,
treatment of oil and of other parts must be done by an
2

INTENDED USE

Daikin will not accept any liability for damage or injury caused as
a result of installation by non-qualified personnel; improper use
or use in conditions not allowed by the manufacturer; failure to
perform the maintenance prescribed in this manual; use of spare

INSTALLATION SITE

When choosing an installation site, you should observe the fol-
lowing rules:
Ū The air conditioning unit should not be placed immediately
under a socket
Ū Do not install the unit in places where inflammable gases or
powders are present
Ū Do not expose the unit to sprays of water; do not install the
3

UNIT DESCRIPTION

MODULATION AND EFFICIENCY IN A RECESS CEILING-MOUNTED UNIT
The range is completed by FWP, which uses inverter BLDC tech-
nology in the electric motors. To the features of FWP adds the
benefits of brushless technology, including a reduction in elec-
tricity consumption and consequent reduction in CO
increase in operating flexibility thanks to the modulation of air
flow and increase in the level of comfort in terms of temperature,
humidity and noise levels.
The range is made up of 8 models with air flows from 300 to 1200
4
FWP
damage occurred during the transport.
For installation and use of accessories, please refer to the relative
technical sheets.
Identify the model of the FWP fan coil following the indications
on the packing container.
SAFETY SYMBOLS
Carefully read this manual.
Warning
Use personal protective equipment
USE SUITABLE PPE (GLOVES FOR REFRIGERANT, PROTEC-
TIVE GOGGLES)
authorized installer and must comply with applicable leg-
islation. Units must be treated at a specialized treatment
facility for reuse, recycling and recovery. By ensuring this
product is disposed of correctly, you will help to prevent
potential negative consequences for the environment and
human health. For more information, contact your installer
or local authority.
ATTENTION:
cording to the classification of Regulation 1357/2014.
parts other than original factory parts.
Equipment designed for ambient air conditioning and intended
for use in civil comfort applications.
unit in laundry room
Ū Install the fan coil on walls or ceilings able to withstand its
weight. Keep a clear space all around the unit to assure the
proper functioning and accessibility for maintenance
Ū Store the unit in its packing container until you are ready to
install it to prevent dust from infiltrating inside it.
m³/h.
Continuous modulation of the air flow and the use of high-ef-
ficiency heat exchangers enables operation also with small
emissions, air-water temperature differences.
2
The heat exchangers can also be optimized in the circuit for cen-
tralized applications such as district cooling.
the unit hasn't dangerous components ac-