Husqvarna PG 690 Bedienungsanweisung Seite 25

"SETTINGS" menu
Jan 05
SETTINGS
SERVICE
"STOP WATCH"
The function "STOP WATCH" measures how much time
is necessary for an operation. The time starts to count
when you start the product.
• "STOP WATCH OFF/ON": Disengages/engages the
function.
• "RESET STOP WATCH": Resets the function.
• [00:00:00]: Shows the operation time in hours,
minutes and seconds.
STOP WATCH
[ OFF ]
RESET STOP WATCH
[ 00:00:00 ]
"PAIR RADIO"
"PAIR RADIO" does a pairing operation of the remote
control and the product.
"RADIO CHANNEL"
"RADIO CHANNEL" shows a selection of radio
channels. To change the radio channel, it is necessary
to do a pairing operation. Refer to
operation on page 28 .
"LANGUAGES"
"LANGUAGES" sets the display text language.
1163 - 004 - 01.10.2020
12:45 Jan 05
STOP WATCH
PAIR RADIO
RADIO CHANNEL
[ 3 ]
LANGUAGE
[ ENGLISH ]
TIME & DATE
Jan 05 12:45
OK
To do a pairing
"TIME & DATE"
"TIME & DATE" sets the time, the date and the format
12:45
for time and date.
SET TIME
[ 12:45 ]
SET DATE
[ 01/05/14 ]
TIME FORMAT
[ 24h ]
DATE FORMAT
[ MM/DD/YY ]
"SERVICE" menu
SETTINGS
SERVICE
"ERROR LOG"
The "ERROR LOG" is a list of faults that the product
finds. Refer to
remote control on page 39 .
"CALIBRATION"
If the product starts to move incorrectly, it is necessary
to calibrate the controls on the remote control and the
control panel. Calibration is done with the remote
control.
Calibration is done for the different controls in the
"CALIBRATION" menu. The selection "MINIMUM" is the
standard value for each function.
• "SPEED": Calibration of the control for product
speed.
Jan 05
Jan 05 12:45
ERROR LOG
CALIBRATION
MACHINE HOURS
114420174 Hours
PRODUCT INFO
Error and warning messages on the
SERVICE
CALIBRATION
SPEED
Jan 05 12:45
MINIMUM
0% (0%)
MAXIMUM
100%
12:45
Jan 05 12:45
25