Introduction; Intended Use; Description Of Components; Package Contents - Parkside PET 25 C3 Originalbetriebsanleitung

ELECTRIC NAILER/STAPLER
PET 25 C3

Introduction

Congratulations on the purchase of your new
appliance. You have chosen a high-quality product.
The operating instructions are part of this product.
They contain important information about safety,
usage and disposal. Before using the product,
please familiarise yourself with all operating and
safety instructions. Use the product only as
described and for the range of applications speci-
fied. Please also pass these operating instructions
on to any future owner.

Intended use

This electric staple gun is intended for stapling
cardboard, insulating material, leather, material
(textiles or natural fibre) and comparable materials
onto softwoods or plywood-like material in private
households. The appliance is only for use in dry
rooms. Any other uses of or modification to the
appliance is deemed to be improper and carries
the risk of serious personal injury. The manufacturer
accepts no responsibility for any damage attribut-
able to misuse. This appliance is not intended for
commercial use.

Description of components

Trigger
ON/OFF switch
Impact force control
Magazine slider
Red line on the front of the magazine slider
4a
Rip fence
Magazine
Scale
Fill level indicator
8a Marking of the fill level indicator
Face plate
│ GB │ IE
■ 2

Package contents

1 electric nailer/stapler
300 staples 25 mm
200 staples 15 mm
300 nails 32 mm
200 nails 25 mm
1 hex key
1 set of operating instructions

Technical data

Type
Rated voltage
Rated current
Operations
30 / min
Dureé /
Short-term operation
Duration
KB
max.
(SO)
15 min
Protection class
Staple width
Type 55
Staple length 15–25 mm
15–25 mm
Type 47
Nail length
15, 20, 25,
32 mm
Noise and vibration data:
Noise measurement value determined in accord-
ance with EN 60745. The A-rated noise level of
the power tool is typically as follows:
Sound pressure level
Sound power level
Uncertainty
Wear hearing protection!
Vibration values determined in accordance with
EN 60745:
Vibration emission value
Uncertainty
PET 25 C3
230 V∼, 50 Hz (AC)
4 A
up to
30 impacts/min
max. 15 min
II / (Double insulation)
6 mm
15, 20, 25, 32 mm
L = 81.3 dB (A)
pA
L = 92.3 dB (A)
WA
K = 3 dB
pA/WA
a = 2.510 m/s
h
K = 1.5 m/s
PET 25 C3
2 ,
2 .