Shutting Off The Engine; Operating The Traction Drive - Toro Power Max 724 OE Bedienungsanleitung

Using Recoil Start

Shutting Off the Engine

Operating the Traction
Drive
CAUTION
If the traction drive is not properly adjusted,
the machine may move in the direction
opposite of what you intended, causing injury
and/or property damage.
Carefully check the traction drive and adjust
it properly, if necessary; refer to
the Operation of the Traction Drive (page 10)
for more information.
Important:
If the machine moves when the
traction lever is in the released position, check the
traction cable; refer to
the Traction Cable (page 21)
to an Authorized Service Dealer for service.
9 Checking
Checking and Adjusting
or take the machine
Figure 16
Figure 17
1. To engage the traction drive, squeeze the left
(traction) lever to the handgrip
2. To stop the traction drive, release the traction
lever.
15
(Figure 18).
Figure 18
g254928
g252411
g001011