Reset Button (Not Available In This Version) - Roadstar RU-400BT Bedienungsanleitung

played in random instead of normal progression. To cancel RANDOM mode, press
'SHF' button (20) again.
21. MICROPHONE
Hi sensitivity microphone for Bluetooth hand free function.
22.RESET BUTTON
Reset function (22) is not available on this model.
ID3 Tag
The file name & track number of the MP3 file will scroll repeatedly through the display
during the playing of the MP3 file.
23. AMS / NUM (SEARCH MP3 FILES)
AMS to store automathically the Raido stations in sequence.
In MP3 mode from USB / SD, can be used to search track directly using the buttons
MEMORY 1 - 6 or VOLUME.
HOW TO USE BLUETOOTH IN YOUR CAR AUDIO
How to Perform Pairing:
Before you can dial out from the car stereo, you must first perform PAIRING. Pairing is a
procedure used to connect 2 Bluetooth devices together.
1. This unit's Bluetooth function is always on, perform the pairing starting from your
cellular phone. Refer to your cellular manual on proper pairing.
2. Perform the search for available Bluetooth devices, "CAR-BT " will show. Enter '0000'
when asking for code.
3. After successful pairing (BT-ON appear in the display), connect to the head unit if it is
not automatically connected.
HOW TO MAKE OR RECEIVE PHONE CALLS
The phone calls can be made only by the dial keys of Mobile Phone.
1. Press the "SEL", (2/3) button to answer of incoming calls.
•During the phone conversation, press the "MODE" button to finish.
•-Press "the MODE" button to reject unwanted calls.
English 11 12 English
Audio Streaming (A2DP)
1. If your phone is "A2DP" format compatible, you can play music in your mobile and the
music will be transferred to car audio unit.
2. Make sure your mobile and the car radio unit is paired and connected.
3. Play the music in your mobile according to your mobile operating method.
4. You can press or on head unit for previous or next tracks.
>> <<
SPECIFICATIONS
TUNER
Sensitivity 2 dBμ
Stereo separation 35 dB
Signal to noise radio 55 dB
Frequency range 87.5-108 MHz
Channel step 50 kHz
Intermediate frequency 10.7 MHz
LINE-OUT
Output 350mV max.
Impedance 10kOhm
GENERAL
Power Supply 13.8V DC
(10.8-15.6V allowable)
Speaker impedance 4 or 8 ohm
Output power 25 W RMS x 4CH
Note: Specifications and the design are subject to possible modification without notice due
to improvement.