Before First Use; Operation - Concept VP4205 Perfect Clean 3v1 Bedienungsanleitung

EN
OPERATING INSTRUCTIONS

BEFORE FIRST USE

1. Fasten the tube with 2. Insert the appliance body
the handle to the
into the suction nozzle.
appliance body
CHARGING
1. Put the hand vacuum cleaner in the appliance body and start
charging.
2. The hand vacuum cleaner can also be charged separately.
56
3. Put the hand vacuum cleaner in
the appliance body.
VP4205 | VP4210
If the green diode starts flashing during operation, it means that the battery is empty and the vacuum cleaner needs to
be charged.
1. Press the button on the handle and turn off the appliance.
2. Plug the power adapter into the socket.
3. Connect the charger connector to the accumulator in the vacuum cleaner body.
4. The green LED will flash, indicating that the appliance is charging normally.
5. As soon as the green LED stops flashing and starts to shine continuously, the battery is fully charged.
6. Disconnect the power adapter from the vacuum cleaner and store it in a safe place.
7. The hand vacuum cleaner can be charged individually and when attached to the body of the main vacuum cleaner.
Caution:
Do not pour water into the charging slot on the body of the appliance to avoid damaging the appliance.
Do not store or recharge the appliance in environment with temperatures below 0 °C or higher than 40 °C. These
temperatures may damage the appliance.
During the charging process, the temperature of the appliance may increase, this is normal.

OPERATION

(for hand vacuum cleaner)
1
Press this button to
release the hand vacuum
cleaner and remove it
from the vacuum cleaner
body.
VP4205 | VP4210
2
Press the button for the first time to turn on the
vacuum cleaner with lower suction power. Press the
button second time for higher suction power.
Press the button third time to turn
the vacuum cleaner off.
3
Put the slot nozzle into the hand vacuum cleaner.
4
Now you can start vacuuming.
EN
57