English; Product Description; First Use - IKEA FRYSA Handbuch

ENGLISH

Product description

1
1
2 2
3 3
4
4
5 5
6 6
4
4
7
7
5 5
4
4
8
8

First use

Connect the appliance to the mains power supply. The ideal
temperatures for preserving food have already been set at the
factory.
To avoid food waste, please refer to the recommended To avoid
food waste, please refer to the recommended setting and
storage times found in the user manual.
Controls
On/Stand-by
A
Press for 3 seconds the
In Stand-by mode, two dashes light up on the display and the
light in the refrigerator compartment does not turn on.
To turn the product on again, a brief press on the button is
sufficient.
Note: this procedure does not disconnect the appliance from
the electricity supply.
Temperature display
The display shows the freezer compartment temperature
(between -16°C and -24°C). Recommended setting: -18°C or -20°
It is possible to set a different temperature with the
Fast Freeze
C
Press the the button 24 hours before placing large amount of
fresh food in the freezer compartment.
When the function is turned on the icon °C lights up. The
function turns off automatically after 48 hours, or manually by
C
pressing the button.
9
9
c
****
c
A B C
D G E F
button to turn the appliance off.
G
1
Control panel
2
NO FROST Module
3
Flap Freezer
4
Glass shelf
5
Middle Drawer Freezer
6
Small Drawer Freezer
7
Big Drawer Freezer
8
Lower Drawer Freezer
9
Door magnet switch housing
Characteristics, technical data and images may vary
according to the model.
Accessories
Freezer block
Note: After switching the appliance on, it will be necessary
to wait for 4 to 5 hours before a temperature suitable for a
standard appliance load is reached.
Eco function
Eco function allows one to concentrate the energy consumption
of the product during off-peak time (usually coinciding with
night time), when energy is available in large quantity and it
costs less than during the day (only in specific countries –using
multiple-rate system based on off-peak times- check your rate
plan with your utility company). To activate the function, press
D
the button
the specific rates plan). For example, if the reduced rate applies
starting at 10:00 p.m., press the button that corresponds to
that time. When the LED is ON, the function is active. After you
activate the function, the product automatically starts to adapt
the energy consumption to the time (i.e. Consuming more
button.
energy during the night then during the day).
IMPORTANT: In order to work properly, the function must be
enabled both during the night and during the day. The function
will remain enabled until deactivated (it will also be deactivated
in the event of a blackout, or whenever the appliance is turned
off). To deactivate the function, press the button again. When
the LED is OFF, the function is not active.
Note: the power consumption of the appliance is declared with
the Eco function disabled
Ice tray
1x 2x
A
On/Stand-by
B
Temperature display
C
Fast Freeze
D
Eco function
E
Black Out alarm
F
Turning Off the Sound Alarm
G
Temperature Setting
Eco at the reduced rate start time (depending on
6