White Balance; Picture Options - Samsung PS50B679 Benutzerhandbuch

„

White Balance

You can adjust the colour temperature for more natural picture colours.
•
R-Offset / G-Offset / B-Offset / R-Gain / G-Gain / B-Gain
• : Resets the default white balance.
Reset
„
Flesh Tone
You can adjust the lesh tone to be more or less red.
N
Changing the adjustment value will refresh the adjusted screen.
„
Edge Enhancement →
You can emphasize object boundaries in the picture.
„
xvYCC → Off / On
Setting the xvYCC mode to on increases detail and colour space when watching movies from an external device (i.e. DVD player).
is available when the picture mode is set to Movie, and the external input is set to HDMI or Component mode.
N
xvYCC
This function may not be supported depending on your external device.
N
❑

Picture Options

You can customize the additional picture settings to suit your preference.
PC mode, you can only make changes to the Colour Tone, Size and Screen
N
In
Burn Protection from among the items in Picture Options.
„
Colour Tone →
Cool / Normal / Warm1 / Warm2 / Warm3
You can select the most comfortable colour tone to your eyes.
N
The adjusted values are stored according to the selected
N
Warm1, Warm2, or Warm3 is only activated when the picture mode is Movie.
„
Size → Auto Wide / 16:9 / Wide Zoom / Zoom / 4:3 / Screen Fit
You can select the picture size which best corresponds to your viewing requirements.
• : Sets the picture in Auto Wide format.
Auto Wide
• 16:9 : Sets the picture to the 16:9 aspect ratio.
• : Select this menu to view 4:3 aspect ratio pictures over a 16:9 aspect ratio TV by stretching the 4:3 picture
Wide Zoom
vertically.
• : Stretches the 16:9 aspect ratio picture vertically.
Zoom
• 4:3 : Sets the picture to the 4:3 aspect ratio.
• : Displays the full native HD signal that cannot be viewed using a normal TV.
Screen Fit
N
Depending on the input source, the picture size options may vary.
N
The items available may differ depending on the selected mode.
PC Mode, only 16:9 and 4:3 mode can be adjusted.
N
In
When Double
N
(
Settings can be adjusted and stored for each external device you have connected to an input of the TV.
N
N
Temporary image retention may occur when viewing a static image on the set for more than two hours.
: Press the ► button to select Position, then press the ENTER E button.
N
Wide Zoom
Press the ▲ or ▼ button to move the screen up / down. Then press the ENTER E button.
: Press the ► button to select Position, then press the ENTER E button. Press the ▲ or ▼ button to move the
N
Zoom
picture up and down. Then press the ENTER E button. Press the ► button to select Size, then press the ENTER E button.
Press the ▲ or ▼ button to magnify or reduce the picture size in the vertical direction. Then press the ENTER E button.
Screen Fit in HDMI (1080i / 1080p) or Component (1080i / 1080p) mode: Select Position by pressing
N
After selecting
the ◄ or ►button. Use the ▲, ▼, ◄ or ► button to move the picture.
: Press the ◄ or ► button to select Reset, then press the ENTER E button. You can initialize the setting.
N
Reset
N
If you use the Screen Fit function with HDMI 720p input, 1 line will be cut at the top, bottom, left and right as in the overscan
function.
„
→ 16:9 / Wide Zoom / Zoom / 4:3
Screen Mode
When setting the picture size to Auto Wide in a 16:9 wide TV, you can determine the picture size you want to see the 4:3 WSS
(Wide Screen Service) image or nothing. Each individual European country requires different picture size so this function is
intended for users to select it.
N
This function is available in
N
This function is not available in
Off / On
, ) mode has been set in PIP, the Picture Size cannot be set.
Auto Wide mode.
PC, Component or HDMI mode.
: Changing the adjustment value will refresh the adjusted screen.
Picture mode.
English - 19
Screen
Advanced Settings
►
Picture Options
Picture Reset
Continued...