Becker Centronic EasyControl EC415-III Montage- Und Betriebsanleitung Seite 29

Deleting all transmitters (except the master
transmitter)
3s
3s
10s
Press the programming button on the master
transmitter for 3 seconds.
▻ The receiver confirms.
Re-press the programming button on the master
transmitter for 3 seconds.
▻ The receiver confirms.
Then press the programming button on the mas-
ter transmitter again for 10 seconds.
▻ The receiver confirms.
► All transmitters (except the master transmit-
ter) are now deleted from the radio receiver.
29 - en