Installation; Grip Tape; Replacement Skates - HyperX Pulsefire Haste Anleitung

Installation

Connect the USB connector to the computer.

Grip Tape

Optionally install the included grip tape for added control and comfort. Attach the grip tape for the left
and right mouse buttons with the pointed end facing the forward direction of the mouse.
3

Replacement Skates

Pulsefire Haste includes an extra set of PTFE skates in case the preinstalled skates are lost, damaged,
or worn.
1) Remove the damaged skate. Gently use a small flathead screwdriver or similar tool if needed.
2) Remove adhesive residue and debris from the mouse. A clean dry surface will provide optimal
adhesion.
3) Peel the replacement mouse skate from the backing paper and install on the mouse. Use
tweezers if needed.
4) Remove the protective film.
Document No. 480HMSH1-A-BK/G.A01
1 2
4
HyperX Pulsefire Haste
1 2 3 4
Page 5 of 6