All manuals and user guides at all-guides.com
Before Initial Use / Use
12 GB
66454_pow_Feinmechaniker_LED_Lupe_content_LB4.indd 12
Attaching the repair device
Push the fixing clamp
the desired height and tighten the fastening screw
clockwise.
Insert the ball joint of the repair device
corresponding recess of the fixing clamp
Fix the repair device
ing screw
clockwise.
16
Mounting the magnifying glass
Push the fixing clamp
set the desired height. Tighten the fastening screw
turning it clockwise.
Insert the ball joint
and tighten the fastening screw
clockwise (Fig. A).
Use
Using the Precision Engineer's LED
Magnifying Glass
T urn the retaining screws
clockwise direction. Clamp the item to be repaired with
the alligator clips
onto the mounting rod
11
in place by tightening the fasten-
15
on to the mounting rod
7
into the corresponding recess
5
for the ball joint
6
on the alligator clips
19
in the repair device
18
, set
10
12
into the
15
.
11
and
10
by
8
5
in a
18
.
15
25.05.11 17:26