DFI NS70-EC Benutzerhandbuch Seite 27

All manuals and user guides at all-guides.com
Dual Function Power Button
Depending on the setting in the "Soft-Off By PWRBTN" field of the
Power Management Setup, this switch will allow the system to enter
the Soft-Off or Suspend mode.
Wake-On-Ring
This feature allows the system that is in the Suspend mode or Soft
Power Off mode to wake-up/power-on to respond to calls coming
through an internal or external modem.
Important:
If you are using a modem add-in card, the 5VSB power source
of your power supply must support a minimum of ≥ 720mA.
Wake-On-LAN
The Wake-On-LAN function allows the network to remotely wake
up a Soft Power Down (Soft-Off) PC. Your LAN card must support
the remote wakeup function.
Important:
The 5VSB power source of your power supply must support
≥ 720mA.
Wake-On-PS/2 Keyboard/Mouse
This function allows you to use the PS/2 keyboard or PS/2 mouse
to wake up a system from the S3/S4/S5 state.
Important:
• If you forgot the password, you must power-off the system,
unplug the power cord and clear the CMOS data. Follow
the steps in the "Jumper Settings for Clearing CMOS Data"
section in chapter 1.
• The 5VSB power source of your power supply must
support ≥ 720mA.
Wake-On-USB
The Wake-On-USB function allows you to use a USB device to
wake up a system from the S3/S4/S5 state.
2
English
27