Hazet-Werk 4925-2509/4 Betriebsanleitung Seite 17

All manuals and user guides at all-guides.com
3.4 Use
Design and function
3
Installation:
• After approx. 5 rotations of the compression nut 4929-2 remove
the half shells of the centring unit 4925-56 and afterwards the
adapter ring. Fig. 6, 7, 8.
• Operate the compression nut with HAZET ratcheting combina-
tion wrench 606-24, while at the same time holding the spindle
using a double box-end wrench 630-8 x 9, until the rubber lips
of the silent block, on the side of the housing, open. Check it
through the opening of the housing.
Please secure separate parts against falling off!
Tools must not tilt!
17