Troubleshooting
Connection cannot be made to the outdoor sensor.
■
Disruptive obstacles or other interference sources such as con-
crete walls or other radio transmission appliances are located
between the temperature station and the outdoor sensor.
Change the installation location and try again.
■
Distance between weather station and outdoor sensor is too
great.
Decrease the distance. "Visual contact" between the out-
door sensor and the temperature station often improves the
transmission.
■
The batteries in the temperature station or the outdoor sensor
are dead.
Replace the batteries.
Synchronisation with DCF signal not possible
■
Disruptive obstacles or other interference sources such as
concrete walls or other radio transmission appliances are
interfering with DCF signal reception.
Change the installation location (e.g. near a window)
and try again.
■
The batteries of the temperature station are dead.
Replace the batteries.
AFT 77 B2
GB │ CY
│
23
■