Automatic And Sound-Controlled Chases - EuroLite EDX-4RT DMX RDM Bedienungsanleitung

Curve 1 (Optically linear)
The increase in light intensity appears to
be linear as DMX value is increased.
Curve 3 (Invers square)
Light intensity control is coarser at low
levels and finer at high levels.

Automatic and Sound-controlled Chases

For the operation without external control unit, 10 memory locations for chases available. Each chase can
consist of up to 30 steps. Chases can run automatically or sound-controlled.
Programming a chase
1
Press UP or DOWN so many times until "PrC" is indicated in the display. Press ENTER to confirm.
2
Use UP or DOWN to select the desired memory location (Ch 1 to 10). Press ENTER to confirm.
3
Use UP or DOWN to select the first scene (SC 1 to 30). Press ENTER to confirm.
4
Use UP or DOWN to select the desired channel (ChL 1 to 4). Press ENTER to confirm.
5
Use UP or DOWN to adjust the channel's dimmer value (0 to 255). Press ENTER to confirm and save
your settings.
6
Press ESC and repeat the steps 3 to 5 to program the next scene. Up to 30 scenes can be compiled to
a chase.
7
Press ESC to return to the main menu level.
Curve 2 (Square)
Light intensity control is finer at low levels and
and coarser at high levels.
Curve 4 (Switch)
The respective channel can only switch on or
off, like an electronic relay.
22/28 00094312.DOCX, Version 1.0