Climatic Classes; Ambient Temperature; Installation; Unpacking And Positioning - Pkm KS 82.3A+ UB Bedienungsanleitung

12. The air vents of the appliance or its built-in structure (if the appliance
is suitable for being built-in) must be completely open, unblocked and
free of any kind of dirt.
13. The rating plate must not be removed or made illegible, otherwise
all terms of the warranty become invalid!
 The manufacturer and distributor are not responsible for any damage or
injury in the event of failure to comply with these instructions.

2. Climatic classes

T
Look at chap. «
ECHNICAL
of your appliance. Your appliance can be operated in rooms with relevant room
temperatures as named below.
C
LIMATIC CLASS
SN
N
ST
T

3. Installation

3.1 Unpacking and positioning

1. Unpack the appliance carefully. Dispose of the packaging as described in chapter
waste management.
2. Completely remove the transport-protection. Be very careful and do not use any
aggressive or abrasive detergents to remove residuals of the transport-protection.
3. Install the appliance in a suitable position with an adequate distance from sources
of heat and cold.
4. Check that the appliance and the power cord are not damaged.
5. Install the appliance in a dry and well-ventilated place.
6. Protect the appliance from direct sunlight.
7. The doors must open completely and without hindrance.
SAVE THESE INSTRUCTIONS.
D »
ATA
+10 0 →+32
+16 0 →+32
+16 0 →+38
+16 0 →+43
for information about the
A
MBIENT TEMPERATURE
0 C
0 C inner home temperature
0 C inner home temperature
0 C inner home temperature
36
CLIMATIC CLASS
e.g. unheated cellar